Step 1
To activate the vibration, simply press the large central button once. To deactivate the vibration, press the button again. If you have any trouble with the function of the CUE1, you can reset the device by holding the button down for at least 20 seconds and then releasing.
Step 2
We recommend you try placing the CUE1 on a few locations up and down your sternum while the vibration is running. This is to get a feel for the most comfortable and effective position to secure the adhesive. Look for a flat spot where the CUE1 has good firm contact with your body. Once you’ve found your preferred location you can place the adhesive patch there.
Step 3
To open the drawer containing the adhesive patches used to wear your CUE1, gently hold the dock on the top and bottom with one hand, without squeezing too hard, and use the other to swing the drawer out in a clockwise direction.
To help you locate the drawer, you will find a textured arrow on the rear of the dock, indicating the best placement for your finger, and the direction the drawer should swing to open. There is a hole in the bottom of the drawer which may help you remove the adhesives more easily.
